Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props
Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props
Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props
Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props
Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props
Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props
Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props
Stan FPV

Stan FPV 2604 Pro Motor - (2410kv) - for T-Mount Props

常规价格 $21.99 销售价格 $27.99

Perfect for ALL types of 5"-6" mini-quads! - especially 


The 2604 size is like nothing you've ever flown before! MORE POWER or MORE EFFICIENT depending on how you fly them! 😯😯😍

Designed 100% by Stan FPV and manufactured by TMotor with their highest quality materials available - this motor is top shelf in terms of everything! Nothing was spared and even new technologies were made to facilitate what Stan needed for his own professional work. After months of design and testing it is finally available to everyone and IN-STOCK  in two kv options! 🤘🏼🔥

The theory behind these motors lies in the low/wide design, producing a much higher amount of torque with the wider magnet placement for the ability to handle the highest pitch props with ease. Being so wide foe the load that it acts like a freewheel in a car, buffering and smoothing the entire system! The effect helps everything from frame vibrations to FC gyro data /calculation, Rx input and more! It's very noticeable in a very positive way! Think ice skater with their hands out - it takes just a little longer than a normal motor size to change acceleration, and so this in itself helps buffer inputs for a smoother flight feel and smoother final footage. 

You get this unbelievable amount of torque and the motor brings it on very smoothly - therefore enabling it to fly much more controlled and smooth with less correction and higher performance!

The smaller the diameter of a motor the more "responsive" they are and the quicker they "change" speeds but the less overall "torque" and oomph against a load. In my experience thats not actually very good in real life performance. For example, when an ice skater's arms are tucked to their body is when they spin the fastest. They start / end by spreading their arms out wider to start to spin / slow down and to start with / regain their balance) especially for cinematic flight we want the exact opposite of "responsiveness".. We want the crispiest final footage - so that means we want our quad to keep its line and not bobble around while being powerful when we want it, to bring that power on smoothly, and to get the longest flight time while pleasing those prior goals. We want that balance cycle of the ice skater's spin and the "flywheel" like effect for much smoother and more powerful/efficient CINEMATIC / FREESTYLE / RACING flights.. This motor does just that! 🔥🔥🔥

The flight feel of this motor is like giving a 2207 or 2306 steroids and a Xanax at the same time! 😂🤘🏼🔥 You can still race fast race courses and have all the control you need, but you lose the twitchy inbetween moves you're nerves making! There is also not a better motor out there for 5" and 6" Cinematic and Freestyle Flight! It all feels much more locked in and smooth! 

Same with freestyle - it helps create a smoother flight with more power available if needed and efficiency when you just need SMOOTH! 

Oh yeah, these things are tremendously efficient if you don't step on them too hard - they've gotten over 15 mins flight time with a Hero9!! (running x2 1500 4s). And if you want the "oomph" they are powerful too! (eats amps ans is more powerful when stepping on the throttle and extremely efficient when using smoothly! 😂🔥💪🏽

Being low in height also increases the strength of the shaft in the event of sideways force (a crash) by decreasing the length of the lever of force applied. In short terms, it makes them nearly indestructible!

Racers can also appreciate the increased smooth power of these motors on race day and will handle the highest prop pitch with ease! These are much more powerful than a 2207 or 2306! 🏋️ And about the same weight or lighter! ⚖

The 5mm Mount version has a titanium 5mm shaft and nut, fits existing props and is meant for 5"-6" Cinematic, Freestyle, and even Racing builds

Almost any 5" FPV drone can benefit from switching to these or building your new rig with these 2604 motors - I have worked extremely hard to make them a reality and now you can enjoy them too! 🤘🏼

Fly like a Bird! 🦅



Suggested Prop (5mm): HQ Ethix P3 (5"), Ethix S5(5"), HQ Ethix K2(6")

Motor Mount Hole Size: 16x16

Prop Mount Options: 5mm / (T-Mount also available) 

Motor Stator Size: 2604

KV (Revolutions per Volt): 2410kv / 1690kv

Weight (w/ 195mm wires): 29.1g

Shaft: 5mm Hollow Titanium

Bearings: EZO

Wire Length: 195mm x 20AWG

Lipo Prop Recommended:

2410kv - 3s, 4s - 5", 6" prop, 4" prop w/ 5" UDP-Guard

1690kv - 3s, 4s, 5s, 6s - 5", 6" prop, 4" prop w/ 5" UDP-Guard



  • (1) Stan FPV 2604 Pro Motor - 5mm Shaft
  • (1) 5mm Prop Nut
  • (8) M3 Frame Mounting Screws
  • (1) Spare Shaft Screw