3" Universal Ducted Propeller Guards (Fits most 3" FPV frames!)
3" Universal Ducted Propeller Guards (Fits most 3" FPV frames!)
3" Universal Ducted Propeller Guards (Fits most 3" FPV frames!)
Stan FPV

3" Universal Ducted Propeller Guards (Fits most 3" FPV frames!)

Prix régulier $7.99 $0.00
Frais de port calculés à la caisse.

MAKE YOUR 3" DRONE SAFER, QUIETER, & SMOOTHER! 🔥

IN-STOCK NOW! 😍

*NEW* INJECTED VERSION is NOW NEARLY INDESTRUCTIBLE!

- MADE OF HQ DURABLE PROP MATERIAL! - 

FEATURES:
*Increased Safety
*Increased Efficiency
*Quieter Flight Noise
*Smoother Flight Performance
*Acro-able 
*Aesthetic AND Functional Drone Accessory
*Customizable
*UNIVERSAL FIT


Compatibility:

Frame: 3" prop size

Motors: any motor using a standard 9mm-12mm M2 four bolt pattern like 1106 4500kv, 1407 4130kv, 2203 3390kv (T-Mount recommended for a "no-prop-trimming" experience and better prop choices - 5mm shaft also works but requires 3" prop to be trimmed down to 2.5" to fit in duct. Currently no 2.5" 5mm props exist.)

Recommended Propeller: HQ Prop T2.5x2.5x3

Easily convert your current 3" or larger drone into a safer smoothed out cinematic flyer! Outdoors and now also INDOORS, HD cam or just fun safe flying! They fit 9mm-12mm  M2(4) screw bolt pattern and are shipped with multiple sizes of rubber spacers  that go under the arm between the arm and UDP-Guard to lock in the perfect height while also dampening the whole system and keeping tension on the bolts to keep them tight.

99% of frames that hold a naked 3" prop will fit these UNIVERSAL DUCTED PROPELLER GUARDS! You can simply bolt them straight onto the bottom of each arm with your own longer bolts from the hardware store / garage, or pick up the 3" UDPG add-on screw kit!

You can use the rubber spacers between the arm and guard to dial in the perfect height and/or add clearance. When tightened, the bolts are then recessed in the guard to give you BUILT-IN landing skids so you can effortlessly slide along concrete or anything your heart desires (soo useful and FUN!) This set-up uses a 2.5" propeller in place of the bigger one - paired with my tuned UDP-Guards, the smaller prop outperforms for cinematic flight in almost every way! It lets the motors work less with the same performance which enables our propellers to handle a higher load and give better flight times with increased thrust and efficiency!

They more than make up for dropping the prop size and adding the weight of themselves, while providing extreme 360 degree propeller safety and a smoother flight feel! With my highly tuned ducts, the smaller / higher pitch prop performs like a smoothed out version of the larger ones giving you higher CONTROL, MANEUVERABILITY, SMOOTHNESS and SAFETY in the place of TOP SPEED - They can easily be installed or taken off to give you two flight styles on the same drone.. on the same tune.. Two drones in one! 🔥🔥

Having these on will make your quad quieter too! Aero and sound wave flow was taken into consideration and implemented here, actually REDUCING prop noise! It's literally like magic and one of the best features about this design. The sounds aims mostly up, reducing perceived noise under and around the aircraft! 

And THE most important feature of all.. SAFETY!! Before these I flew without protection and even tho I had "the skill" I was accidentally sliced multiple times by propeller blades trying to get "the shot" indoors around myself, the worst being on my calf and that sent me on a mission to protect others from harm and to help give drones a good, safe name so that I could use them to continue to get the amazing shots these drones are capable of, but without risking anyone or their property. These guards were years in the making, I literally put thousands of hours into making these what they are today.. And let me tell you - THEY DELIVER!

This NEW INJECTED VERSION is manufactured for me by my good friends HQ Prop and they are made from their very durable polycarbonate that they use for their amazing durable props. These guards are now NEARLY INDESTRUCTIBLE. I'm not even exaggerating. You probably will need to buy less props too because you don't even bend them in crashes with these on 😉🔥 it's a crazy feeling to fly thats hard to explain but sooo good! The only way is to feeel it for yourself. You will not be disappointed! 

These do ACRO like a beast too! It's SO fun and extremely maneuverable!! Think spoilers for your quad if you're at an angle higher than about 15 degrees, it just LOCKS in!

Cinewhoop flying anyone?! No need to go out and buy a whole new drone to get great safe proximity footage. These convert your current 3" fpv drone into a film making MONSTER! Smooth out the flight of your new/old rig and bring on slower more manageable flight while carrying that naked or full GoPro Hero that is still able go pretty quick if needed for some amazing cinematography potential on any quad, new or old. Safe enough to fly indoors and thru the smallest gaps! Bring new life to that old quad that's been on the wall for a year now or plan a completely new build specifically around them! They are extremely versatile! They fit the oldest and newest of frames! Almost any frame that carries a 3" or larger naked prop can be converted with 3" UDP-Guards! 🔥🔥

There's really no downside to these. It's a win-win-win-win! If you fly 3" drones, then you need at least one set of these to share between all your 3" quads or grab a separate set for each build! They are for when you want the unique feel and smooth footage they provide and /or want to get close to people and property and get those EPIC cinematic shots much more safe and controlled! Either way they are now an invaluable tool of mine and many many drone professionals around the world! 

What's Included:
- (x1) 3" Injected UDP-Guards
- (x1) 1mm Rubber Spacer
- (x1) 2mm Rubber Spacer

Available in SINGLE and SET OF 4 options

More SIZES of UDP-Guards AVAILABLE!


FLY LIKE A BIRD!

 

PLEASE NOTE: DO NOT USE THREAD LOCKER* WITH INJECTED UDP-GUARDS AT ALL, IT IS NOT NEEDED! (IT HAS BEEN FOUND TO CORROSIVELY DEGRADE THE HQPROP DURABLE MATERIAL LIKE BUTTER - SCIENCE IS CRAZY!) If used, let dry COMPLETELY before installing screws!

*Longer motor bolts necessary (2mm-4mm longer depending on your rubber spacer configuration and frame thickness. Likely to be 4mm increase in bolt length with 2mm spacer or 2mm increase with no spacer)
*Fly responsibly and within your skill level.
*Don't risk other's safety in any way.
*A heavy quad can break things when it crashes even if it doesn't break a nail doing it.. SO ALWAYS BE CAREFUL EVERY FLIGHT!
*I am in no way responsible for any damages that you may cause with your new confident flying. INDOOR FLYING is CRAZY and HARD and DANGEROUS even with these guards. FLY AT YOUR OWN RISK.
*So again.. FLY SAFE! and HAVE FUN!!


Partager ce produit


Aussi de cette collection